January 24 Through February 4—TUCSON, ARIZONA: Annual show
Welcome to the GemologyOnline.com Forum
A non-profit Forum for the exchange of gemological ideas
It is currently Thu Mar 28, 2024 5:02 am

All times are UTC - 4 hours




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: Cutting malachite
PostPosted: Mon Mar 02, 2009 2:47 pm 
Offline
Gemology Online Veteran
User avatar

Joined: Thu Jul 17, 2008 12:08 pm
Posts: 647
Location: Edina, MN
HI all,

I as a general rule do not do repairs but a friend of mine has a Malachite heart that I gave them and they broke the tip off it.

I want to reshape the tip without poisoning myself with the arsenic, I have a respirator, any other words to the wise? (Or words for me??) :wink:

_________________
Gems are purchased because they are pretty, so they should be as pretty as possible!

https://www.johndyergems.com
Artisitic and designer cut gems

https://www.ultratecfacetingmachine.com
Authorized Ultra Tec dealer.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Mar 02, 2009 4:21 pm 
Offline
Gemology Online Veteran

Joined: Thu Jan 03, 2008 3:48 pm
Posts: 707
Location: Vancouver, Canada
John - I cab as well as facet - Malachite doesn't pose a big problem unless you're inhaling the spray/dust or licking your fingers or stone (don't laugh, that's how many people wet the stone to see what's happening!).

Given that you'll only be doing a small amount of grinding, as long as you use lots of water and wash your hands carefully afterwards you should be fine.

Another material you should be wary of is abalone shell - I didn't know it was toxic until after cutting several pieces. I was a kid at the time and it doesn't seem to have caused me any short or long-term harm except for that twitch and giggle that I get when seeing beautiful stones!

-Allan

----
http://www.omnifaceter.com


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Mar 02, 2009 4:39 pm 
Offline
Site Admin
User avatar

Joined: Sun Oct 16, 2005 12:22 pm
Posts: 21602
Location: San Francisco
Be sure to wear a mask.
I got a very serious case of copper poisoning when I was in my early 20's cabbing vast amounts of malachite and azurite. :(


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Mar 02, 2009 5:32 pm 
Offline
Gemology Online Übergod
User avatar

Joined: Tue Aug 01, 2006 3:24 am
Posts: 4997
Location: McDonough GA
Barbra Voltaire wrote:
Be sure to wear a mask.
I got a very serious case of copper poisoning when I was in my early 20's cabbing vast amounts of malachite and azurite. :(


That's also when her hair turned red. Copper red.

_________________
http://www.selectgem.com


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Mar 02, 2009 6:26 pm 
Offline
Platinum Member

Joined: Tue Nov 29, 2005 2:02 pm
Posts: 2646
Barbaiba. :P

Don't feel bad, I used to facet lead fishing sinkers. :)


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Mar 02, 2009 6:37 pm 
Offline
Gold Member
User avatar

Joined: Thu Jan 24, 2008 4:01 pm
Posts: 1902
Location: Pine City, NY and Dothan, AL
JB wrote:
Barbaiba. :P

Don't feel bad, I used to facet lead fishing sinkers. :)


I bet they clogged the laps. What did you use for polish?


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Mar 02, 2009 6:45 pm 
Offline
Platinum Member

Joined: Tue Nov 29, 2005 2:02 pm
Posts: 2646
I licked them. :)


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Mar 02, 2009 7:20 pm 
Offline
Gemology Online Übergod
User avatar

Joined: Tue Aug 01, 2006 3:24 am
Posts: 4997
Location: McDonough GA
LMAO!!!!!!!!!!!!

_________________
http://www.selectgem.com


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Mar 02, 2009 7:48 pm 
Offline
Moderator: Lapidary Arts and Tools
User avatar

Joined: Tue Jun 12, 2007 6:41 pm
Posts: 5534
Location: Massachusetts, USA
Quote:
Another material you should be wary of is abalone shell - I didn't know it was toxic until after cutting several pieces. I was a kid at the time and it doesn't seem to have caused me any short or long-term harm except for that twitch and giggle that I get when seeing beautiful stones!


I got sick on malachite when I had the cab business ages ago. I should have known better...no excuse.

And everyone knows about cinnabar and orpiment, right?

I once saw a beautiful little carved Chinese cinnabar bottle in a museum. Considering that a couple of countries used to use condemned convicts to mine it, I wondered what crime the artisan did to deserve that job.

Orpiment has a really high RI, something like 3. Oh, I'm just DYING to cut that stuff... :P

_________________
https://gearloose.co/


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Mar 02, 2009 9:49 pm 
Offline
Gemology Online Veteran
User avatar

Joined: Sun Dec 30, 2007 12:01 am
Posts: 556
Location: Vancouver, Canada
Hello Jon,

I wonder if the guy that cut this lived to cut anything else;
http://cgi.ebay.com.sg/ULTRA-RARE-EYECLEAN-1-79-CARAT-FACETED-REALGAR-CHINA-NR_W0QQcmdZViewItemQQitemZ180273623843


Hello John,

Other than holding your breath and washing your hands, not much to add except that malachite likes to separate along the banding and heat encourages it.

Tony.

_________________
www.thegemdoctor.com
Beautiful British Columbia


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Tue Mar 03, 2009 7:55 am 
Offline
Moderator: Lapidary Arts and Tools
User avatar

Joined: Tue Jun 12, 2007 6:41 pm
Posts: 5534
Location: Massachusetts, USA
Quote:
I wonder if the guy that cut this lived to cut anything else; (Realgar Link)


Looks like he was feeling worse and worse by the time he got to the crown. Maybe the previous stone looked better.

I can see taking certain risks if something makes a beautiful stone valuable to collectors, but really do draw the line at faceting rat poison.

BTW, I have been getting emails recently from people regarding "Reactor shielding glass". Some of it is a high lead/lanthanum flint that can be cut with the same cautions as lead glass.

Some of it is uranium glass. There is an early thread here on one I cut.
Don't do it. It's butt-ugly, no one wants it, no one will buy it*, and if you inhale the dust, you're playing the lung cancer lottery.
It's a risk/benefit thing.

* I did get a couple of emails. One person wanted a "huge" pendent for their mother in law, and the other wanted one for an ex-wife. I assume they were joking.
Realistically, you cannot GIVE the stone away. For a few years I was collectiing "Vaseline Glass". Bring a geiger counter to a yard sale, find a piece, and the owners beg you to take it away, free.

_________________
https://gearloose.co/


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Tue Mar 03, 2009 4:36 pm 
Offline
Gemology Online Veteran

Joined: Thu Jan 03, 2008 3:48 pm
Posts: 707
Location: Vancouver, Canada
Wow. That Realgar photo brings new meaning to the saying, "cut with an axe."

I'm not so ashamed of my meets now!

:D

-Allan

----
http://www.omnifaceter.com


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Tue Mar 03, 2009 8:14 pm 
Offline
Gemology Online Veteran
User avatar

Joined: Thu Jul 17, 2008 12:08 pm
Posts: 647
Location: Edina, MN
Thanks for the tips!

_________________
Gems are purchased because they are pretty, so they should be as pretty as possible!

https://www.johndyergems.com
Artisitic and designer cut gems

https://www.ultratecfacetingmachine.com
Authorized Ultra Tec dealer.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Tue Mar 03, 2009 8:26 pm 
Offline
Site Admin
User avatar

Joined: Sun Oct 16, 2005 12:22 pm
Posts: 21602
Location: San Francisco
brimsjewelry wrote:
Barbra Voltaire wrote:
Be sure to wear a mask.
I got a very serious case of copper poisoning when I was in my early 20's cabbing vast amounts of malachite and azurite. :(


That's also when her hair turned red. Copper red.


My hair color is a naturally occuring product!


Clairol's #33R.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 4 hours


Who is online

Users browsing this forum: No registered users and 25 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Gemology Style ported to phpBB3 by Christian Bullock