GemologyOnline.com
https://www.gemologyonline.com/Forum/phpBB2/

Diamond Master Sets
https://www.gemologyonline.com/Forum/phpBB2/viewtopic.php?f=10&t=25636
Page 1 of 1

Author:  Rachelle Carswell [ Thu Apr 02, 2020 6:59 am ]
Post subject:  Diamond Master Sets

Hello - i hope all are safe and well given the current world situation.

I have read through all the previous posts about the Diamond Master sets, specifically those graded by GIA and AGS with a minimum of 5 EGIKM.

As it has been several years since the last post on this topic, I wondered if anyone had found new leads for already put-together graded masters (5) by GIA or AGS...preferrably in Canada location.

Author:  Alan F. [ Mon Apr 13, 2020 1:16 pm ]
Post subject:  Re: Diamond Master Sets

Ready assembled diamond master sets will not be an off-the-shelf item. The value would be so high and sales so infrequent that it would not be worth a dealer tying up so much capital stocking them. Your only chance of getting a ready assembled set would be if a gemologist was retiring and selling his set. Your best bet would be to put the set together yourself, buying the stones one by one as they come on the market.

Author:  Stephen Challener [ Thu Apr 16, 2020 11:29 pm ]
Post subject:  Re: Diamond Master Sets

There was a time that they were sold, but everyone seems to have given up on it.

Author:  roshanravan [ Sat Apr 18, 2020 11:06 pm ]
Post subject:  Re: Diamond Master Sets

I can Help you after the Quarantine!! check PM

Author:  Barbra Voltaire, FGG [ Sun Apr 19, 2020 12:28 am ]
Post subject:  Re: Diamond Master Sets

Rachelle doesn't have enough poss approved to get PMs . Soon. :D

Author:  roshanravan [ Sun Apr 19, 2020 8:39 pm ]
Post subject:  Re: Diamond Master Sets

Rachelle Carswell wrote:
Hello - i hope all are safe and well given the current world situation.

I have read through all the previous posts about the Diamond Master sets, specifically those graded by GIA and AGS with a minimum of 5 EGIKM.

As it has been several years since the last post on this topic, I wondered if anyone had found new leads for already put-together graded masters (5) by GIA or AGS...preferrably in Canada location.


Also Good Read here: viewtopic.php?p=174673#p174673
The stones you choose for Masterstone should have those specifications. after quarantine is over i am able to help you, as i am member of Diamond Dealers Club New York

Page 1 of 1 All times are UTC - 4 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/