|Franklin Faceters Frolic FFF9
|Page 1 of 1|
|Author:||Morpheus [ Tue May 24, 2016 7:53 am ]|
|Post subject:||USFG Franklin Faceters Frolic FFF 9|
FFF9 is quickly approaching.
Make your plans now to attend the Ninth Annual USFG-Franklin Faceters Frolic on July 28, 29 and 30, 2016.
We are part of the United States Faceters Guild and have expanded to a 3 day format to include more speakers and programs along with a broad array of dealers.
The Franklin Faceters Frolic is held at the same time as the Macon County Gemboree and several other gem and mineral shows in Franklin, NC. The Frolic will be at the The Factory, (formerly known as The Fun Factory: same location as FFF8) in Franklin, NC.
Thursday, July 28, 2016
Dealers open for business in the Depot Room from 10:00 am to 4:00 pm
This year, Robert Strickland will offer three GemCad classes: Beginner, Intermediate and Advanced. The Beginner class will introduce you to the basic commands and features of GemCad. The Intermediate course will be a refresher on the basics and creating and modifying existing designs and creating new designs of your own. The Advanced course is for GemCad users who would like to explore the finer points of GemCad.
The cost is $25.00 per class. To register and pay for the classes, go to the website and click on one of the PayPal buttons:
If you prefer to pay by check, send $25.00 for each class you would like to register for, made payable to The Faceters Frolic and mail to Ken Michalek, PO Box 182, Greer, SC 29652. Any questions, email Ken: email@example.com
9:00 am to 11:00 am – GemCad for Beginners – For those who want to learn the basic How-To of GemCad Software. You should bring your Notebook with GemCad already loaded on it ready to go by 9:00 AM. You can down load a free trial of GemCad at http://www.gemcad.com 30 days before the class. If you do not purchase before you get there, you may purchase during the Frolic from Robert. Once you learn how to use GemCad, we believe you will realize the real value in this software tool for any level if faceting you do.
1:00 pm to 3:00 pm – Intermediate GemCad – For those who need a refresher on basic GemCad and further operations.
Friday, July 29, 2016
9:00 am – 11:00 am – Advanced GemCad – Robert will go into advanced capabilities of GemCad for the experienced user.
1:00 pm – 3:00 pm – Lisa Elser – “Going Pro” –Internationally known gem cutter Lisa Elser of Custom Cut Gems will speak about how she got started in business and her experiences as a faceter.
3:00 pm- 5:00 pm – Sue Lichtenberger – Kitchen Counter Rock and Gem ID. Sue will explain how to use readily available items to help identify gems and minerals. This is a hands on discussion and was a popular topic last year.
6:00 in The Depot Room – The Faceters Meet and Pretty Stone Contest. Come and enjoy meeting with the dealers, speakers and other faceters from around the world. Pizza and soft drinks will be available for $5.00 per person. Bring a stone that you have cut and enter in either the Natural or Simulated Gem division. Prizes will be awarded to the winner in each category. This is a “Beauty Contest” and the winners will be chosen by those in attendance.
Saturday, July 30, 2016
Dealers open for business in the Depot Room from 10:00 am to 4:00 pm.
10:00 am to 12:00 pm – Master Gem Cutter Jerry Call will discuss some of his cutting tips and techniques for Maximizing Your Rough. Last year, Jerry’s talk turned into a lively question and answer session covering a host of different topics. Don’t miss this opportunity to learn from one of the best!
Equipment and Supplies
Marsh Howard – Lightning Laps and Polishes – http://www.lightninglap.com – Marsh will have a good supply of all of his latest laps and polishes. The original Lightning Lap, The Beast Diamond Polish, and the Mag-Dop
Tom Maxwell – Carolina Custom Gems – http://www.carolinacustomgems.com -Tom will have the Graves Mark 5XL digital faceting machine set up and available for demonstration and immediate delivery. Tom is also a representative for Ultra-Tec and will be demonstrating the latest Ultra-Tec V-5 digital faceting machine. In addition, Tom will have a complete line of Gearloose Polishing Laps and Polishing Products and fine facet rough.
Ultra-Tec rep, Gerald Boykin will be demonstrating the Ultra-Tec Fantasy Machine.
Charlie Musitano – Jersey Instruments – Charlie will have the Omni-E and Patriot faceting machine on display,
John Garsow – John E. Garsow Gems and Minerals – John will have a large selection of fine facet rough from all over the world.
Dan Lynch – Dan will have sunstone, ametrine, zircon, tanzanite, heliodor, amethyst, and tourmaline, plus what he finds on a buying trip to Africa in June.
Lisa Elser – Custom Cut Gems – http://www.lisaelser.com – Lisa will have a wide assortment of rough to choose from.
You will find almost everything you would want in the way of faceting equipment and supplies along with facet rough not available anywhere else all in one place. These dealers are great people and have the highest ethical standards. Without their support, the Frolic couldn’t take place.
Admission to the USFG-FFF9 is FREE again this year thanks to a generous support from the dealers and attendees.
There will be DOOR PRIZES each day donated by the dealers along with a Grand Prize on Saturday donated by The Frolic. Raffle tickets will be $1.00 each and the more tickets you buy, the better your chances of winning some nice rough or faceting accessory. You do not have to be present to win, however contact information will be needed. The proceeds of the sale of raffle tickets goes a long way in supporting The Frolic and helping it grow. The Frolic is the only event of its kind for the faceting community in the Eastern United States.
For more information, see http://franklinfacetersfrolic.com/
|Author:||Morpheus [ Fri Jul 08, 2016 4:05 pm ]|
|Post subject:||Franklin Faceters Frolic FFF9|
Only 3 weeks away, the Frolic has something for everyone.
Lisa Elser of Custom Cut Gems will be talking about:
Lisa will talk about her path from hobby cutter with a day job, through ‘hobby that pays its bills’ to professional job that pays HER bills. This will be (we hope) very interactive. It’s different for every faceter. But she’ll talk about common mistakes and pitfalls, as well as things that have worked for her and others.
You don't want to miss this event July 28-30, 2016
|Author:||Morpheus [ Tue Jul 12, 2016 10:05 am ]|
|Post subject:||Re: Franklin Faceters Frolic FFF9|
Ever wondered how to design your own gem? Well wonder no longer, sign up for a GemCad class now! Don't have GemCad? Sign up for GemCad 1, bring a laptop and we will get you a 30 day trail and you get a lesson, all for $25!!!
Have some experience and want to learn more? GemCad 2, intermediate class is for you, guess what, just $25.
So you know everything about GemCad? do you? Sign up for GemCad 3, advanced, and find out. Challenge the master, Robert Strickland (designer of the program) will be there to take you over and above your own expectations. Yep, just $25.
Seats available for all classes, don't miss your opportunity to take your faceting abilities to a new level.
|Page 1 of 1||All times are UTC - 4 hours|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group