GemologyOnline.com
https://www.gemologyonline.com/Forum/phpBB2/

My very first Difussion Bonded Mokume Gane
https://www.gemologyonline.com/Forum/phpBB2/viewtopic.php?f=38&t=23670
Page 1 of 1

Author:  madfacets [ Mon Apr 17, 2017 12:57 am ]
Post subject:  My very first Difussion Bonded Mokume Gane

My very first Mokume Gane Difussion bonded at 1300 F for about 8 hours. It is made up of 12 layers of Argentium and 11 layers of Copper. Not sure what the final piece will be yet.
Image

Author:  Barbra Voltaire, FGG [ Mon Apr 17, 2017 2:03 am ]
Post subject:  Re: My very first Difussion Bonded Mokume Gane

Awesome!
What are the actual dimensions of the piece?

Author:  madfacets [ Mon Apr 17, 2017 9:36 am ]
Post subject:  Re: My very first Difussion Bonded Mokume Gane

The dimmensions are roughly 60mm by 60mm and 20 guage. The starting billet was 24mm by 24mm. Image ImageImageImage

A progression of patterning the billet. The last picture shows the contrast of the copper against the silver after annealing.

Author:  Lucy- [ Mon May 08, 2017 9:38 pm ]
Post subject:  Re: My very first Difussion Bonded Mokume Gane

Fantastic work!!! Something I need to get to work on again soon! did you use any specific copper alloy?

Author:  Barbra Voltaire, FGG [ Mon May 08, 2017 11:52 pm ]
Post subject:  Re: My very first Difussion Bonded Mokume Gane

Crazy cool, madfacets!

Author:  madfacets [ Wed Jun 21, 2017 12:45 am ]
Post subject:  Re: My very first Difussion Bonded Mokume Gane

https://imgur.com/a/rsenX

Author:  madfacets [ Sat Jul 22, 2017 6:33 pm ]
Post subject:  Re: My very first Difussion Bonded Mokume Gane

Lucy sorry for the late reply. The copper alloy is 110 from k and s metals. It is I believe 99.9 percent copper and .04 oxygen. I have some actual jewelry I've made and I will try to post some pictures soon.


Thanks

Page 1 of 1 All times are UTC - 4 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/