January 24 Through February 4—TUCSON, ARIZONA: Annual show
Welcome to the GemologyOnline.com Forum
A non-profit Forum for the exchange of gemological ideas
It is currently Tue Mar 19, 2024 3:48 am

All times are UTC - 4 hours




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Elements: Difference in major, minor, & trace
PostPosted: Fri Dec 28, 2018 1:36 am 
Offline
Platinum Member

Joined: Tue Jun 03, 2008 4:40 pm
Posts: 2667
Location: South Dakota
Can anyone tell me what the "cut-off" is between what's considered a minor, major, and/or trace element?
I'm sure there are a ton of variables to contend with, to fully explain the question above, right?
It depends on the testing equipment being used, I'm sure, as well as the sample in question.
Or is the same basic equation used across all minerals/gems, regardless of its type?
What percentage of an element in a gem/mineral makes it considered a major constituent, as opposed to a minor.

Hypothetical Example: ....let's say anything under <0.01% is considered trace, and any element measured over that amount is considered a "minor/major element".(the cut off), then will that "cut off" be the same for ....say....beryl, or garnet, or zoisite, etc., as is for tourmaline?
I seen some folks use only "Major" and "trace", to describe things(scholastic papers), with no "minor" mentioned at all. Sometimes it doesn't require the extra distinction, I guess.
Are all species of mineral governed by the same "cut off", is part of what I'm trying to understand.
How many types of testing methods/machines, those commonly used in the major labs and university's, can test and make the distinction between trace and major/minor elements?

I hope it makes sense....sometimes I can't put pen to pad like I want to. #-o

_________________
MrAmethystguy ~ Some jokes just fluorite over my head!


Top
 Profile  
Reply with quote  
 Post subject: Re: Elements: Difference in major, minor, & trace
PostPosted: Fri Dec 28, 2018 2:33 am 
Offline
Moderator
User avatar

Joined: Mon Apr 02, 2012 9:31 pm
Posts: 4015
Location: North Carolina
I don't know that these terms are rigorously defined, though there is likely a rule of thumb.
Generally I think the distinction would have to do if you're dealing with a bulk constituent which has an established place in the chemical formula of this mineral because it's perfectly happy to slot into whatever site in the lattice it fits into, or if it's an element that's forced into a site it's not so happy in and thus can't make up a significant percentage of the composition (something that's easier to think of as a trace impurity than partial solid solution towards another compositional endmember). That's a bit loosey goosey though. I'd guess something around low single digits would be a rule of thumb cutoff?

_________________
Rough and cut classic and exotic synthetic gems:https://store.turtleshoard.com


Top
 Profile  
Reply with quote  
 Post subject: Re: Elements: Difference in major, minor, & trace
PostPosted: Fri Dec 28, 2018 2:41 am 
Offline
Valued Contributor

Joined: Fri Nov 01, 2013 9:16 am
Posts: 239
Location: Germany
probably this helps a little bit to understand:
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=6&cad=rja&uact=8&ved=2ahUKEwjzp4-m9cHfAhXCZFAKHbrwC8UQFjAFegQIBRAC&url=http%3A%2F%2Felementsmagazine.org%2Fget_pdf.php%3Ffn%3Drossman.pdf%26dr%3De5_3&usg=AOvVaw2LD9nDEh0AMtjwvkKt3KFT

Here are some definitions:
https://www.mindat.org/glossary/minor_element
https://www.mindat.org/glossary/trace_element

_________________
http://www.gemstore-24.com
gemstones, precision cuts and more...


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 4 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Gemology Style ported to phpBB3 by Christian Bullock