does anyone know what the main height adjustment is used forr on a lapidary machine? i know theres a main height adjustment and a micro... sorry im totally new to this..
does anyone know what the main height adjustment is used forr on a lapidary machine? i know theres a main height adjustment and a micro... sorry im totally new to this..
You set the angle you want to cut the facet at with whichever type of protractor your machine uses.
Then you use the mast height adjuster to lower or raise the stone so that it is in contact with your cutting lap at the desired angle.
also i have two more questions. 1.when you transfer the dop stick, is it supposed to be positioned at a certain angle in order to cutt the proper angles? 2. where is the best place to buy a new lapidary machine?
also i have two more questions. 1.when you transfer the dop stick, is it supposed to be positioned at a certain angle in order to cutt the proper angles? 2. where is the best place to buy a new lapidary machine?
There should be a piece of equipment called a transfer jig that comes with your machine. This is designed to ensure that you stone is properly aligned after the transfer.
Where, and what machine to buy depends on where you live most likely. Where do you live?
Users browsing this forum: Google [Bot] and 28 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum