January 24 Through February 4—TUCSON, ARIZONA: Annual show
Welcome to the GemologyOnline.com Forum
A non-profit Forum for the exchange of gemological ideas
It is currently Thu Mar 28, 2024 4:48 pm

All times are UTC - 4 hours




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Rubies and Acid
PostPosted: Fri Sep 29, 2006 7:16 pm 
Offline
Active Member

Joined: Fri Jun 23, 2006 9:32 am
Posts: 73
Location: bangkok
Hi all,

I was recently on a trip buying ruby rough here in thailand and saw rough stones being soaked in acid prior to heat treatment. is this considered common practice?

I was told that this was to remove any rust particles on the surface of the stones. was not able to get an answer as to what type of acid was used. i guess just knowing that it was acid was enough for the guy in flip flops who was doing the soaking. lol.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Sep 29, 2006 7:27 pm 
Offline
Gemology Online Veteran
User avatar

Joined: Fri Sep 08, 2006 7:03 pm
Posts: 605
Location: Sweden
Hi!
If it was made only for removing iron oxide, then it probably was oxalic acid since it is effective and cheap. It is the relatively strongest organic acid, but still not very dangerous to handle. I use it to clean up quartz specimens.

_________________
If it sounds good, then say it again!


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Sep 29, 2006 8:59 pm 
Offline
Gemology Online Übergod
User avatar

Joined: Mon Oct 17, 2005 2:39 pm
Posts: 3528
Location: San Francisco Bay Area, CA
Interesting, I'd never heard of this practice. I love this forum, you always learn new things. :) Thanks for the info!


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Oct 01, 2006 9:57 pm 
Offline
Gemology Online Veteran
User avatar

Joined: Mon Oct 17, 2005 1:06 pm
Posts: 718
Location: Bangkok, Thailand
Hello,
This is a very common practice, it is even necessary in order to remove as much as possible most of the foreign substance which could fill any cavities or fissures. This is performed for rubies and for sapphires and not only in Thailand. Usually they use hydrofluoric acid for few minutes to 24 hours. The fact is that rubies and sapphire are not affected by acids even the most powerful ones.
You can have a look to the typical heat process using the Thai way and starting with some acid work on the following page:
http://www.fieldgemology.com/showpic.php?sub_id=58&type=school

This page show you step by step the way traditionally sapphire are heated since the discovery of this type of heat treatment by Samuang Kaewen in 1968 in Chanthaburi, Thailand.

All the best,

_________________
Vincent Pardieu

www.fieldgemology.org
www.conservationgemology.org

The views expressed here are V. Pardieu’s opinions and do not necessarily reflect those of GIA Laboratory Bangkok (http://www.giathai.net)where he is an employee since Dec 2008.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Oct 02, 2006 4:17 am 
Offline
Gemology Online Veteran
User avatar

Joined: Fri Sep 08, 2006 7:03 pm
Posts: 605
Location: Sweden
Exellent pictures, Vincent!
Do you know what concentration they use? Hydroflouric acid is scary...in high concentration it is used to etch glass, but is so dangerous to handle that it has not been allowed in Sweden for use outside the universities' research labs since the 60's!

_________________
If it sounds good, then say it again!


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Oct 02, 2006 5:00 am 
Offline
Gemology Online Veteran
User avatar

Joined: Mon Oct 17, 2005 1:06 pm
Posts: 718
Location: Bangkok, Thailand
Hi,
Well they use the higher concentration they found...
It is also used to remove glass filling in rubies after heat treatment with borax or other fluxes.
But as I say for sure this has to be handle with care. Whatever heat treatment of rubies and sapphire is "a little bit more dangerous than cooking" as do be performed correctly it needs to handle several security and health hazard. I do not advise people without experience and training to try to heat gemstones like trying to cook potatoes.
All the best,

_________________
Vincent Pardieu

www.fieldgemology.org
www.conservationgemology.org

The views expressed here are V. Pardieu’s opinions and do not necessarily reflect those of GIA Laboratory Bangkok (http://www.giathai.net)where he is an employee since Dec 2008.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Oct 02, 2006 5:04 am 
Offline
Gemology Online Veteran
User avatar

Joined: Fri Sep 08, 2006 7:03 pm
Posts: 605
Location: Sweden
Scary was the word... Is there any possible threat in leakage from remaining acid in fissures, to the customer? Even one drop will eat through the flesh.

_________________
If it sounds good, then say it again!


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Oct 02, 2006 7:02 am 
Offline
Gemology Online Veteran
User avatar

Joined: Mon Oct 17, 2005 1:06 pm
Posts: 718
Location: Bangkok, Thailand
LOL
No not at all,
As you can see the stones are heavily washed after being cleaned by the acid and then they are heated. Nothing to worry about as the acid does not penetrate corundum...
All the best,

_________________
Vincent Pardieu

www.fieldgemology.org
www.conservationgemology.org

The views expressed here are V. Pardieu’s opinions and do not necessarily reflect those of GIA Laboratory Bangkok (http://www.giathai.net)where he is an employee since Dec 2008.


Top
 Profile  
Reply with quote  
 Post subject: HF
PostPosted: Mon Oct 02, 2006 12:01 pm 
Offline
Platinum Member
User avatar

Joined: Wed Apr 26, 2006 12:44 am
Posts: 2056
Location: San Francisco
Hydrofluoric acid won't just "eat through skin", however that doesn't mean it's not dangerous. If it does get on the skin, it can cause a systemic poisioning effect which can be fatal. This must be medically treated as soon as possible.. here's the link..

http://www-safety.deas.harvard.edu/advise/accident.html

so wear an apron, rubber boots and be very very careful..


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Oct 02, 2006 12:23 pm 
Offline
Gemology Online Veteran
User avatar

Joined: Fri Sep 08, 2006 7:03 pm
Posts: 605
Location: Sweden
It will not "eat up" the skin, like other acids, but it will eat through it very quickly and fall out as salts that is very hard to disolve and cause tissue death.

_________________
If it sounds good, then say it again!


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Thu Oct 05, 2006 9:58 am 
Offline
Active Member

Joined: Fri Jun 23, 2006 9:32 am
Posts: 73
Location: bangkok
Thanks for the info Vincent. gotta love seeing people play with acid wearing no gloves, nomask/glasses and flip flops. i still remember my lab teachers lectures on safety in the lab at my university, goes right out the window over here. i guess when in rome... :roll:


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Thu Oct 05, 2006 9:24 pm 
Offline
Gemology Online Veteran
User avatar

Joined: Mon Oct 17, 2005 1:06 pm
Posts: 718
Location: Bangkok, Thailand
Hi,
Well on the photos about heat treatment in cambodia, the burner does not use any protection, that's correct but in other places I was able to witness that like in bangkok or Chantaburi, it is not the same: They use gloves, masks and operate in places with a good ventilation...
All the best,

_________________
Vincent Pardieu

www.fieldgemology.org
www.conservationgemology.org

The views expressed here are V. Pardieu’s opinions and do not necessarily reflect those of GIA Laboratory Bangkok (http://www.giathai.net)where he is an employee since Dec 2008.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 4 hours


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Gemology Style ported to phpBB3 by Christian Bullock