January 24 Through February 4—TUCSON, ARIZONA: Annual show
Welcome to the GemologyOnline.com Forum
A non-profit Forum for the exchange of gemological ideas
It is currently Thu Mar 28, 2024 11:45 am

All times are UTC - 4 hours




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: heat treatment of gemstones and fluid inclusions
PostPosted: Sun Jul 28, 2013 1:42 pm 
Offline
Gold Member

Joined: Sun Jun 28, 2009 9:56 am
Posts: 1284
I was wondering, what is the threshold temperature that will cause fluid inclusions in a gemstone to dehydrate thus revealing the treatment?


Top
 Profile  
Reply with quote  
 Post subject: Re: heat treatment of gemstones and fluid inclusions
PostPosted: Mon Jul 29, 2013 12:20 am 
Offline
Valued Contributor
User avatar

Joined: Wed Jun 18, 2008 12:01 am
Posts: 370
Location: Easley, South Carolina
would depend on what the fluid was. however, water reaching 100 degrees C would expand explosively when steam was produced and cause sever fracturing of the mineral structure.'

john

_________________
John Atwell Rasmussen, Ph.D., AJP
Web: http://handmadeartists.com/shop/rasmussengems
Blog: http://rasmussengemsandjewelryllc.blogspot.com/


Top
 Profile  
Reply with quote  
 Post subject: Re: heat treatment of gemstones and fluid inclusions
PostPosted: Mon Jul 29, 2013 6:53 am 
Offline
Gold Member

Joined: Sun Jun 28, 2009 9:56 am
Posts: 1284
well I suppose a negative cavity inside a gem can handle the steam pressure to a certain degree, doesn't it? (I'm mainly thinking of salty water inclusions)


Top
 Profile  
Reply with quote  
 Post subject: Re: heat treatment of gemstones and fluid inclusions
PostPosted: Mon Jul 29, 2013 8:19 am 
Offline
Gemology Online Veteran
User avatar

Joined: Sun Oct 04, 2009 11:18 am
Posts: 595
Location: Madrid, Spain
Water passes to vapor at 100 ºC only at standard atmospheric pressure (1 bar). Inclusions cavities are closed systems so when you heat the stone, internal pressure rises and the temperature of liquid to vapor phase change for water rises too. In the example below you have to go higher than 280ºC to get supercritical fluid.

As for decrepitation, you usually have to go even higher, until the internal pressure overpasses the resistance of the mineral structure. The exact temperature will depend on many factors: temperature of mineral formation, the strength of its structure, but also the size and even orientation of the inclusions!

In the samples of emeralds from the Urals, like that one recorded, in some cases I had to overpass the temperature of total homogenization in some 50-100ºC to reach decrepitation, but in other cases some inclusions exploded even before total homogenization. So usually a wide range of decrepitation temperatures can be observed even in the same sample!


_________________
http://gem-sphalerite.com
http://gems-inclusions.com


Top
 Profile  
Reply with quote  
 Post subject: Re: heat treatment of gemstones and fluid inclusions
PostPosted: Mon Jul 29, 2013 8:25 am 
Offline
Site Admin
User avatar

Joined: Fri May 12, 2006 11:24 am
Posts: 7523
Location: Rome, Italy
nice vid, Egor!!! Really well done, thx for sharing!!!! =D> =D> =D> =D> =D> =D> =D>

ciao
albé

_________________
GemmoRaman-532 - GemmoFTIR - GemmoSphere - EXA


Top
 Profile  
Reply with quote  
 Post subject: Re: heat treatment of gemstones and fluid inclusions
PostPosted: Mon Jul 29, 2013 11:14 am 
Offline
Gold Member

Joined: Sun Jun 28, 2009 9:56 am
Posts: 1284
now that's a number one gem video =D>

my concern is that unlike corundums which are usually treated at high temperatures, most gems (quartz, beryls, topaz, tourmalines, spodumene, apatite...) are color treated at rather low temperatures, like 400 to 600°C, and I was wondering is any dehydrated veils and/or tension cracks would consistently be observed from such low heating? Or is it possible that a 400°C heat treatment would leave fluid inclusions unafected (so that observation of fluid inclusions would not reveal the treatment)?


Top
 Profile  
Reply with quote  
 Post subject: Re: heat treatment of gemstones and fluid inclusions
PostPosted: Tue Jul 30, 2013 2:11 am 
Offline
Gold Member
User avatar

Joined: Tue Jan 08, 2008 1:35 pm
Posts: 1189
Location: Vancouver, Canada
Fabulous video! Thank you Egor!

_________________
Lisa Elser, G.G.
http://www.lisaelser.com


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 4 hours


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Gemology Style ported to phpBB3 by Christian Bullock