January 24 Through February 4—TUCSON, ARIZONA: Annual show
Welcome to the GemologyOnline.com Forum
A non-profit Forum for the exchange of gemological ideas
It is currently Thu Mar 28, 2024 5:08 am

All times are UTC - 4 hours




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Hello from Indiana
PostPosted: Tue Sep 16, 2014 2:39 am 
Offline
New to the Forum or The Quiet Type

Joined: Mon Oct 14, 2013 12:11 am
Posts: 2
Hello again...?,
Been hounding small streams near hillsides in central-southern Indiana for the last year or so. Found a few pieces of diamond and hope to find more larger pieces soon. Going to be getting out there soon before it gets cold. I got some neoprene wader in case I'm a little late, or early, too. LOL
I finally broke down and got a thermal tester last year and a lot of pieces turned out positive on the low setting of 1-2 on the diamond selector II cheapo tester. I've seen a lot of videos online of people testing with them set really high on large pieces, so it makes me think they're just hyping what they have to be something it is not. Most my pieces are really glassy with inclusions and small, some are larger, but clarity isn't all that great in most. Brown, to yellow, to clear. Finding them in my 'spot' along with green chromium kimberlite pieces. Most the crystal pieces are on the industrial side, but they are diamonds... Well at least I believe they are. All signs point to it other than spectrometry. :) I plan to invest in lapidary soon too to begin learning to craft my own jewels.
I will get a couple pics up here to show in a while. But, I'm glad to be back on here!


Top
 Profile  
Reply with quote  
 Post subject: Re: Hello from Indiana
PostPosted: Tue Sep 16, 2014 12:06 pm 
Offline
Site Admin
User avatar

Joined: Sun Oct 16, 2005 12:22 pm
Posts: 21602
Location: San Francisco
Hi Mr. Diggity and welcome.
May I suggest my personal favorite diamond tester:
http://www.presidium.com.sg/PDMT-A.html

I find this one quite reliable.


Top
 Profile  
Reply with quote  
 Post subject: Re: Hello from Indiana
PostPosted: Tue Sep 16, 2014 6:17 pm 
Offline
Moderator
User avatar

Joined: Mon Apr 02, 2012 9:31 pm
Posts: 4015
Location: North Carolina
A hardness test would be a very quick and efficient way to test them. Try a piece of corundum, or topaz in a pinch. You're quite unlikely to have accidentally come across something that's harder than 7 but not diamond.

_________________
Rough and cut classic and exotic synthetic gems:https://store.turtleshoard.com


Top
 Profile  
Reply with quote  
 Post subject: Re: Hello from Indiana
PostPosted: Tue Sep 16, 2014 6:35 pm 
Offline
Site Admin
User avatar

Joined: Sun Oct 16, 2005 12:22 pm
Posts: 21602
Location: San Francisco
I prefer a thermal tester.
Diamonds can cleave easily if you put too much pressure in the wrong direction, but more importantly for me is time and reliability.....a reliable thermal will get accurate results immediately.
Slam dunk.
One certainly does not have to worry about stumbling on an alluvial deposit of moissanite. 8)


Top
 Profile  
Reply with quote  
 Post subject: Re: Hello from Indiana
PostPosted: Wed Sep 17, 2014 2:43 pm 
Offline
Moderator
User avatar

Joined: Mon Apr 02, 2012 9:31 pm
Posts: 4015
Location: North Carolina
Well, with an industrial-grade diamond it's less likely to be as catastrophic as with a clean crystal. Generally my thinking was that it's much more likely that he has a chunk of topaz or corundum lying around than a thermal tester, and it would be a very quick and reliable way to tell if he should investigate further.

_________________
Rough and cut classic and exotic synthetic gems:https://store.turtleshoard.com


Top
 Profile  
Reply with quote  
 Post subject: Re: Hello from Indiana
PostPosted: Wed Sep 17, 2014 11:40 pm 
Offline
Site Admin
User avatar

Joined: Sun Oct 16, 2005 12:22 pm
Posts: 21602
Location: San Francisco
I'm so pedantic, I would use hardness points.


Top
 Profile  
Reply with quote  
 Post subject: Re: Hello from Indiana
PostPosted: Wed Sep 17, 2014 11:54 pm 
Offline
Moderator
User avatar

Joined: Mon Apr 02, 2012 9:31 pm
Posts: 4015
Location: North Carolina
Barbra Voltaire wrote:
I'm so pedantic, I would use hardness points.

Those would be good for a larger sample; for testing a small grain I'd rub the grain against the topaz crystal rather than trying to scratch the grain. But of course if he has the time and to buy a set of hardness points he should do a thermal tester instead.

_________________
Rough and cut classic and exotic synthetic gems:https://store.turtleshoard.com


Top
 Profile  
Reply with quote  
 Post subject: Re: Hello from Indiana
PostPosted: Thu Sep 18, 2014 12:07 am 
Offline
Site Admin
User avatar

Joined: Sun Oct 16, 2005 12:22 pm
Posts: 21602
Location: San Francisco
8)


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 4 hours


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Gemology Style ported to phpBB3 by Christian Bullock